Modelling of Bending a Flat Sheet

Please login with a confirmed email address before reporting spam

I am trying to deform a flat sheet into a semi conical shape. I want to study the stress in the flat sheet as it undergoes deformation into a conical shape ( similar to a piece of paper wrapped around a cone ).

I tried using Solid Mechanics and have created a conical structure ( material : steel ) and rectangular sheet ( material : Al ). The bottom of sheet and cone have been fixed and i am applying a force of 10^9N in Y-direction.

However, I only get a very small displacement of the sheet. Can someone guide me what is going wrong here? My aim is to wrap this sheet around the conical surface.



1 Reply Last Post Apr 7, 2025, 5:17 a.m. EDT
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 2 hours ago Apr 7, 2025, 5:17 a.m. EDT

From just the plot it is very difficult to guess what is wrong. But if you look at the stress color legend, the peak stress is of the order of 10^9 MPa (that is seven order of magnitude larger than the yield stress), so there must be some very fundamental flaw in your model.

-------------------
Henrik Sönnerlind
COMSOL
From just the plot it is very difficult to guess what is wrong. But if you look at the stress color legend, the peak stress is of the order of 10^9 MPa (that is seven order of magnitude larger than the yield stress), so there must be some very fundamental flaw in your model.

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.