Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

GEOMETRY OF A SOLID ON A CYLINDRICAL SURFACE

Posted Feb 26, 2013, 10:10 a.m. EST Geometry Version 4.3 1 Reply

Marco Lomuscio
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,
I have two questions:

1)what kind of strategies can I use to attack a strip of flexible polymer on a cylindrical surface?

2)Can I measure the length of portions of curves whose design geometry in the space?
1 Reply Last Post Feb 27, 2013, 3:31 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Feb 27, 2013, 3:31 a.m. EST
Hi

probably with qa combination of Geometry + work plane + Helix + Sweep

you can measure with the ruler icon on the graphics, select domain, boundary edge or point for element ID to measure on

--
Good luck
Ivar
Hi probably with qa combination of Geometry + work plane + Helix + Sweep you can measure with the ruler icon on the graphics, select domain, boundary edge or point for element ID to measure on -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content