Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

License Error

Posted Mar 11, 2013, 3:54 a.m. EDT Installation & License Management Version 4.3a 1 Reply

Nithin Kumar Peratla
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Can I know what this license error means??

Cannot obtain license for COMSOL Multiphysics GUI

License error.
BORROW failed.
Feature : Comsol GUI
License path : E:\comsol43a\license\license.dat
FLEXnet Licensing error : -117,556 System error : 2""
For further information, go to www.flexerasoftware.com
1 Reply Last Post Mar 11, 2013, 3:45 p.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 11, 2013, 3:45 p.m. EDT
Hi

I would say either you do not have a floating licence, so that the borrowing is active, or you have all licence already in use

In anycase only your sysadmin, looking after the flexlm deamon can tell from the log. And the best support for licence issues is via your local COMSOL rep.

--
Good luck
Ivar
Hi I would say either you do not have a floating licence, so that the borrowing is active, or you have all licence already in use In anycase only your sysadmin, looking after the flexlm deamon can tell from the log. And the best support for licence issues is via your local COMSOL rep. -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content