Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to combine the Frequency Domain and Coil Current Calculation

Posted Mar 15, 2013, 11:33 a.m. EDT Low-Frequency Electromagnetics, Studies & Solvers Version 4.3a 0 Replies

Andreas Schneider
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello everyone,

i´m trying to simulate an numerical coil with alternating current. The coil is built with the "Multi-Turn Coil Domain". My coil type is numeric wich requires an additional "Coil Current Calculation" step before my "Frequency Domain" step in my study. I solved it for 50,500,5000 Hz and looked at the coil paramters. My coil excitation is set to 0.15A wich should be the coil current for all frequencies. The "Coil voltage" and "Coil resistance" should be different for each frequency which is not, if i do a global evaluation for those two parameters.
Anyone got an idea how i can solve my problem? I´m attaching my modelfile, if someone is willing to take a look at it.


Best wishes,
Andreas Schneider

Attachments:

0 Replies Last Post Mar 15, 2013, 11:33 a.m. EDT
COMSOL Moderator

Hello Andreas Schneider

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content