Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Pulsed Jet

Posted Mar 25, 2013, 4:47 a.m. EDT Fluid & Heat, Microfluidics Version 4.2a 4 Replies

Ndiaye Abdoulaye Séga
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,
I'm trying to make a pulsed jet for a tilted Micro Jet for flow control. I want to ask you guys if it's possible to make it, how can i do it?

Salut,
Je suis entrain d'essayer de réaliser des jets pulsés sous comsol, j'aimerais savoir comment on peut les réaliser jusque là j'ai pas encore trouver de solutions.
4 Replies Last Post Mar 25, 2013, 8:40 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 25, 2013, 5:19 a.m. EDT
Hi

you can apply functions of "t" instead of only scalars in any entry of COMSOL, just as COMSOL expects full fields (i.e.for a HT case T(x,y,z,t)) and not only a scalar value

--
Good luck
Ivar
Hi you can apply functions of "t" instead of only scalars in any entry of COMSOL, just as COMSOL expects full fields (i.e.for a HT case T(x,y,z,t)) and not only a scalar value -- Good luck Ivar
Ndiaye Abdoulaye Séga
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 25, 2013, 5:31 a.m. EDT
Hi and thanks for you answer, but I need to couple "Speed + Frequency", the goal is to control the fluid flow by using a pulsed jet with a defined frequency.

Thanks again
Hi and thanks for you answer, but I need to couple "Speed + Frequency", the goal is to control the fluid flow by using a pulsed jet with a defined frequency. Thanks again
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 25, 2013, 8:19 a.m. EDT
Hi

but do you intend to sole in the time domain ?
in which case you can add a parameter for the average speed and one for the pulsing strength and time/period

In frequency domain it's probably tougher as the pulses are not really "periodic"

--
Good luck
Ivar
Hi but do you intend to sole in the time domain ? in which case you can add a parameter for the average speed and one for the pulsing strength and time/period In frequency domain it's probably tougher as the pulses are not really "periodic" -- Good luck Ivar
Ndiaye Abdoulaye Séga
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 25, 2013, 8:40 a.m. EDT
Hi
Why not I'm going to try it this way and i'll be back .
Thanks
Hi Why not I'm going to try it this way and i'll be back . Thanks

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content