Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Assign number of processors to a Comsol server
Posted Apr 4, 2013, 4:41 p.m. EDT Interfacing Version 4.3a 0 Replies
Please login with a confirmed email address before reporting spam
the option -np sets the maximum number of processors that Comsol is allowed to use. When Comsol is started in server mode this option seems to be ignored.
For example Comsol server is started (allowing one processor only): comsol server -np 1
Then an instance of Matlab is connected to this server and a model is solved in a certain time. Now I try the same thing but allowing Comsol server to use two processors: comsol server -np 2
Solving the same model takes about the same time to finish. So -np doesn't seem to influence the runtime.
Is it possible that Comsol does not accept -np in server mode?
Best regards
Hello Eli Duenisch
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.