Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

which kind of solver?

Please login with a confirmed email address before reporting spam

Hi all,
i am doing some kind of simulation in RF using 4.3 version comsol and the RAM of my computer is about 30G , how to select the best solver to use almost of my RAM to finish the task as faster as possible?

2 Replies Last Post Apr 8, 2013, 5:24 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Apr 7, 2013, 1:43 p.m. EDT
Hi

use the default solver,

You might be able to choose a Direct or Lumped approach in stead of separate segregated steps, if this applies to your model

--
Good luck
Ivar
Hi use the default solver, You might be able to choose a Direct or Lumped approach in stead of separate segregated steps, if this applies to your model -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Apr 8, 2013, 5:24 a.m. EDT
Thank you Ivar
Thank you Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.