Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Moving mesh example

Posted Apr 18, 2013, 11:20 a.m. EDT Mesh Version 4.4 8 Replies

Ehsan Asadi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

Is there any example of using moving mesh with a pdf guideline?

I need to model a moving magnet next to a coil and calculate the induced voltage!
8 Replies Last Post Oct 15, 2014, 7:23 a.m. EDT
Arthur Shoihet
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Apr 18, 2013, 11:30 a.m. EDT
.
.
Ehsan Asadi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Apr 18, 2013, 11:51 a.m. EDT
Thank you so much.

I am still working on your example to understand what it is trying to do. A quick question: in the prescribed deformation, domains 5 and 6 are assigned to have a prescribed mesh deformation in z direction. NA later on in prescribed mesh displacement 4 we assign the one of the boundaries of domains 5 and 6 to have the same prescribed z displacement, why?

Thank you so much. I am still working on your example to understand what it is trying to do. A quick question: in the prescribed deformation, domains 5 and 6 are assigned to have a prescribed mesh deformation in z direction. NA later on in prescribed mesh displacement 4 we assign the one of the boundaries of domains 5 and 6 to have the same prescribed z displacement, why?
Yu Xin
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Feb 25, 2014, 4:05 p.m. EST
can u share me with thatexample
can u share me with thatexample
Ehsan Asadi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Feb 26, 2014, 9:22 p.m. EST
Hey,

Sure, I will share it with you and I made this working. BUt first I have to remove soem of the parts which will be our design. So If I forget to do this with in the next days, remind me.

Thanks,
Ehsan
Hey, Sure, I will share it with you and I made this working. BUt first I have to remove soem of the parts which will be our design. So If I forget to do this with in the next days, remind me. Thanks, Ehsan
Charve Lau
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 15, 2014, 9:11 a.m. EDT
hi there, I am also stuck with the moving mesh of a permanent magnet . can you send me a copy of the moving mesh example please ? thx a lot!
hi there, I am also stuck with the moving mesh of a permanent magnet . can you send me a copy of the moving mesh example please ? thx a lot!
Feifan Wang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 23, 2014, 8:25 a.m. EDT
These days I tried to use the moving mesh program. But I found a problem.
When my model has a small work distance (i.e., we need less remeshing times), the moving mesh can work very well, but when it comes to a big model. It doesn't work..
So i really want to know if I have a wrong seeting?
Plz be kind share me your example.
Thank you so much.
Feifan
These days I tried to use the moving mesh program. But I found a problem. When my model has a small work distance (i.e., we need less remeshing times), the moving mesh can work very well, but when it comes to a big model. It doesn't work.. So i really want to know if I have a wrong seeting? Plz be kind share me your example. Thank you so much. Feifan
Mohammad Uzzal Hossain Joardder
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Sep 17, 2014, 11:14 p.m. EDT
Hi,
I ma doing moving mesh of food due to heat and mass transfer.
Do you have any moving mesh example with PDF guideline.

Thank you in advance.

King regards,
Mohammad Joardder
Hi, I ma doing moving mesh of food due to heat and mass transfer. Do you have any moving mesh example with PDF guideline. Thank you in advance. King regards, Mohammad Joardder
Chris Humiston
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 15, 2014, 7:23 a.m. EDT
Arthur,

Can you send me the example of the moving mesh model? I am working on a similar motion described in the thread and would like something to follow.

Thank you
Arthur, Can you send me the example of the moving mesh model? I am working on a similar motion described in the thread and would like something to follow. Thank you

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content