Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Eigenfrequency study with FSI interface in 4.3a

Please login with a confirmed email address before reporting spam

I attempted to use the FSI interface with the eigenfrequency study step using its default configuration under 'custom studies' in the model wizard. The study step indicates a warning, however, so I suspect the eigenfrequency solver settings are not compatible with the physics settings. I included a simple model to illustrate the fault. All eigenfrequency solutions appears at 'NaN.'

Has anyone had any luck with this interface using an eigenfrequency study?


1 Reply Last Post Apr 18, 2013, 1:51 p.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Apr 18, 2013, 1:51 p.m. EDT
Hi

no way, it's not set up for those equations. Eigenfrequency and fluics is tricky and does not work as easly as for solid alone.

--
Good luck
Ivar
Hi no way, it's not set up for those equations. Eigenfrequency and fluics is tricky and does not work as easly as for solid alone. -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.