Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Electrical Field simulation

Posted Apr 24, 2013, 5:11 p.m. EDT 1 Reply

Mahla Poudineh
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I have interdigit structure covered by gold nanostructure. Is it a way to simulate electrical field in my structure?

Thanks,
1 Reply Last Post Apr 25, 2013, 3:04 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Apr 25, 2013, 3:04 a.m. EDT
Hi

I would say the physics to use is either ES or EC (latter if you current is flowing, former if only electro-statics) But the real challenge is probably what you mean by microstructure and how to mesh that ;)

--
Good luck
Ivar
Hi I would say the physics to use is either ES or EC (latter if you current is flowing, former if only electro-statics) But the real challenge is probably what you mean by microstructure and how to mesh that ;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content