Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Constrain

Posted Apr 26, 2013, 1:05 a.m. EDT Version 4.3a 2 Replies

Saeed Taheri
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I want to define a variable and ask COMSOL to stop running when this variable exceed from a special amount or when it doesn't change with time more.

Thanks a lot in advance.
Saeed
2 Replies Last Post Apr 26, 2013, 4:52 p.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Apr 26, 2013, 2:21 a.m. EDT
Hi

check the doc and or help on solver stop conditions, it's down in the solver tree

--
Good luck
Ivar
Hi check the doc and or help on solver stop conditions, it's down in the solver tree -- Good luck Ivar
Saeed Taheri
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Apr 26, 2013, 4:52 p.m. EDT
Hi Ivar,

Thanks a lot for your help.

saeed
Hi Ivar, Thanks a lot for your help. saeed

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content