Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Modelling a Lumped Capacitor in COMSOL (Frequency Domain EM simulation)

Posted May 10, 2013, 2:30 a.m. EDT RF & Microwave Engineering 2 Replies

Olutosin Fawole
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I am trying to critically couple a resonator to a microstrip transmission line using a lumped coupling capacitor. Does anyone know how I can do this in COMSOL. I know it is possible in HFSS. Can COMSOL do the same?

Thanks you
2 Replies Last Post May 10, 2013, 11:42 a.m. EDT
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 10, 2013, 5:12 a.m. EDT

Hi,

yes, in the new 4.3b version you can add lumped elements (capacitors, inductors and impedances) to the model in a way similar to lumped ports.

Cheers
Edgar

--
Edgar J. Kaiser
www.emphys.com
Hi, yes, in the new 4.3b version you can add lumped elements (capacitors, inductors and impedances) to the model in a way similar to lumped ports. Cheers Edgar -- Edgar J. Kaiser http://www.emphys.com
Olutosin Fawole
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 10, 2013, 11:42 a.m. EDT
Thank you Edgar. That was very helpful.

Regards
Thank you Edgar. That was very helpful. Regards

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content