Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
simple tissue ablation model
Posted May 25, 2013, 10:10 a.m. EDT Heat Transfer & Phase Change Version 4.3b 1 Reply
Please login with a confirmed email address before reporting spam
Hey all,
Im trying to set up a very simple ablation model of cardiac trouble and am having trouble
the model is a simple 2D axisymmetric geom consisting of a square with a small rectangular electrode section substracted from the bottom left corner.
All im trying to do is set the electric current to 25V on the 2 electrode boundaries and view the temp profile across the rest of the tissue, although im struggling to get it to work properly .
Any help would be much appreciated
Im trying to set up a very simple ablation model of cardiac trouble and am having trouble
the model is a simple 2D axisymmetric geom consisting of a square with a small rectangular electrode section substracted from the bottom left corner.
All im trying to do is set the electric current to 25V on the 2 electrode boundaries and view the temp profile across the rest of the tissue, although im struggling to get it to work properly .
Any help would be much appreciated
1 Reply Last Post May 25, 2013, 10:45 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
The problem im having seems to be linking the electric potential at the electrode boundary to the bioheat equations?