Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Problem with heat transfert in lava
Posted Jun 4, 2013, 10:50 a.m. EDT Fluid & Heat, Heat Transfer & Phase Change Version 4.3b 3 Replies
Please login with a confirmed email address before reporting spam
I posted a topic here because I encounter a problem with Comsol. Indeed, I try to modelize a lava flow, but I have a problem to fix the temperature of middle flow as you can see on this picture below (:
www.pixenli.com/images/1370/1370356942039372700.png (:
I would like to fix a line of same temperature in the aim to get two gradients : between the floor and the middle of the flow and between the surface and middle of the flow (:
Thank you in advance (:
Alexis, Jordan.
P.S : Sorry my bad english, I'm french >.<
Please login with a confirmed email address before reporting spam
Up !
--
Comsol, c'est pire qu'une femme
Please login with a confirmed email address before reporting spam
--
Comsol, c'est pire qu'une femme
Please login with a confirmed email address before reporting spam
I think I don't understand your problem, you want to imposed a Dirichlet boundary condition of constant temperature inside your domain (in a line) ?
- Is this lava flow or liquid glass you are simulating?
- I think you cannot imposed boundary condition inside the domain. You can make a source term in that line and make a damping function which is zero if T=T_const, positive if T< T_const and negative if T>T_const.
Kind regards,
Duarte Albuquerque