Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

disable scineffect in the coil domane

Posted Jun 18, 2013, 5:25 a.m. EDT Low-Frequency Electromagnetics Version 4.3b 0 Replies

Viktor Reising
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear all,
in my model i have 2 circular coils width N1=20 and N2=20. N1 have a currenr 1A and N2 have a current 0A. I started my study width 140kHz. Frequency domane. Because in the real we use a high freqency litz wire for the windings. Now my question how i can owerwrite the scineffect in the wire. Ich need the eddy currents everywhere bud not in the wire. You find my model below for your actions.

Attachments:

0 Replies Last Post Jun 18, 2013, 5:25 a.m. EDT
COMSOL Moderator

Hello Viktor Reising

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content