Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Coupling transport of diluted species and laminar flow modules.

Posted Jun 28, 2013, 6:04 a.m. EDT Microfluidics Version 4.1 2 Replies

Tobias Hutzenlaub
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am trying to couple the transport of diluted species and the laminar flow modules.

What am I doing wrong? I'm guessing it has something to do with my solver settings. Do I need to solve the laminar flow first and then use it as starting point for diffusion/convection?

I attached the model file.

Thanks!

Attachments:

2 Replies Last Post Jul 1, 2013, 2:10 a.m. EDT
Tero Hietanen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 28, 2013, 3:23 p.m. EDT
Hi,

Add "Pressure Point Constraint" under laminar flow and select one point from model. With this model is working.

Best regards

Tero
Hi, Add "Pressure Point Constraint" under laminar flow and select one point from model. With this model is working. Best regards Tero
Tobias Hutzenlaub
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jul 1, 2013, 2:10 a.m. EDT
Thanks!
Thanks!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content