Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Symmetric boundary condition in COMSOL 4.3

Posted Jul 1, 2013, 4:05 p.m. EDT RF & Microwave Engineering, Geometry Version 4.3 0 Replies

Yan Guan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I am using Comsol 4.3 now. I am wondering whether it still has the symmetric boundary condition in RF module as Comsol 3.5 or something similar that I can minimize the simulated geomitrical size to minimize the calculation amount.

Thank you very much for your help.

Yan
0 Replies Last Post Jul 1, 2013, 4:05 p.m. EDT
COMSOL Moderator

Hello Yan Guan

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content