Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Acoustic S Parameters Calculation

Posted Jul 8, 2013, 7:43 a.m. EDT Acoustics & Vibrations Version 4.2a, Version 4.3 0 Replies

Manu Sahay
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am having some difficulty in calculating the acoustic S parameters in COMSOL 4.2a.

1) What parameter should be measured to calculate the S Parameters? Should it be the acoustic pressure [Pascals] or the Sound Pressure level [ Decibels]?

2) I have taken the line integral of the scattered acoustic pressure level (acpr.p_s) at 2 lines- one which is on the same side of the materal as that of the incident wave [for reflected part] and one on the opposite side of the material as compared to the incident wave [for the transmitted part]. Is this a correct approach? Should I take the line integral at a very large distance from the material or at a point that is very close to the material?

Please help out.

0 Replies Last Post Jul 8, 2013, 7:43 a.m. EDT
COMSOL Moderator

Hello Manu Sahay

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content