Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
External radiation source- solar radiation
Posted Aug 16, 2013, 3:36 p.m. EDT Heat Transfer & Phase Change Version 4.3 0 Replies
Please login with a confirmed email address before reporting spam
I have a final project where I should measure maximum solar radiation heat flux during a day on re-radiating surface (i.e mirror) towards a window. My object finally is to to find an optimum angle(which will be controlled by a control system) for the mirror that should re-radiate the maximum heat flux toward the chosen surface(in my case- window). I've searched manuals and tutorials over the web to find how I can simulate the given problem in Comsol 4.3 but it seems I cannot do it. As far as I succeeded is to simulate a heat flux on given geometry during specific time of a day, wheres my goal is to simulate heat flux re radiated from the mirror given a mirror angle over the whole daytime range.
Any clues and directions would be much appreciated!
Regards,
Victor.
Hello Victor Skarl
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.