Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Pipe Model for heat transfer (Conjugate heat transfer)
Posted Aug 24, 2013, 3:05 a.m. EDT Fluid & Heat, Geometry Version 4.2a 0 Replies
Please login with a confirmed email address before reporting spam
I solving the conjugate heat transfer problem.
The problem definition is:
In a shell and tube configuration, the heat transfer fluid is flowing in tube with some velocity and shell side is phase change material. The length size of configuration is very large compared with its inner and outer diameter.
The heat transfer fluid is flowing through the inner pipe and the shell side is phase change material.
Now I would like to used convective heat flux boundary at the exit condition. So can anybody tell me which expression or equation I have to used for solving the convective heat flux boundary at exit.
Thanking you in advance.
Vinay Patel
Hello Vinay Patel
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.