Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Fixed amount of confined fluids in presence of electric and magnetic field

Please login with a confirmed email address before reporting spam

Hi everyone,
How can I apply electric and magnetic field on a fluid which is deposited on a plate and there is another plate at a some distance d apart from surface of liquid. (air above the fluid). The problem is that there is no inlet and outlet in my system but for studying the fluid volume fraction i have to use two phase level set model which need fluid to flow... how can I get over it? Please help me with it.

Thanks
Vineet

0 Replies Last Post Aug 28, 2013, 3:30 a.m. EDT
COMSOL Moderator

Hello Vineet Kumar

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.