Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Energy Harvester using a vibration generator and magnets

Posted Sep 9, 2013, 9:03 a.m. EDT LiveLink for MATLAB Version 4.3b 0 Replies

Labib Ehsan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

For a thesis paper my group member and I are going harvest energy using a vibration generator and magnets. we are using COMSOL to virtually recreate the system. so far we've been able to make the housing and place the 2 fixed magnets on either ends, a coil, 1 variable magnet.

we are having some problems with fixing the material of the magnet. is there a recent update of the magnetic material list of the material browser.

Is there any way to write the coercive force equation in COMSOL, or if possible can we use MATLAB and export it into COMSOL?

this is the first time we are dealing with a software of this magnitude, so any help will be appreciated. thank you.
0 Replies Last Post Sep 9, 2013, 9:03 a.m. EDT
COMSOL Moderator

Hello Labib Ehsan

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content