Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Import from SolidWorks

Posted Sep 11, 2013, 6:07 p.m. EDT 2 Replies

Viktor Filiposki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I was following the tutorial for the cooling of an injection mold (www.youtube.com/watch?v=JyXhGKN3iX0), and I want to ask is there any way to import the curve for the cooling channels directly from SolidWorks. If not, what is the best way to make the curve like the one that I have on my original model of the mold.

Thanks,

Viktor
2 Replies Last Post Sep 12, 2013, 1:54 a.m. EDT
Tae Eun Kim
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Sep 11, 2013, 8:26 p.m. EDT
I think you need the "LiveLink for Solidworks" module, and when you click the Geometry > LiveLink Interfaces > LiveLink for SolidWorks, you can import the CAD geometry directly into COMSOL Multiphysics.
I think you need the "LiveLink for Solidworks" module, and when you click the Geometry > LiveLink Interfaces > LiveLink for SolidWorks, you can import the CAD geometry directly into COMSOL Multiphysics.
Viktor Filiposki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Sep 12, 2013, 1:54 a.m. EDT
It's OK when you import a 3D model file, but what about when I want to import a 2D sketch file, like I mentioned before.

And something else, there is an error during the synchronization between Comsol and SolidWorks and I can't use the LiveLink feature.

Thanks,

Viktor
It's OK when you import a 3D model file, but what about when I want to import a 2D sketch file, like I mentioned before. And something else, there is an error during the synchronization between Comsol and SolidWorks and I can't use the LiveLink feature. Thanks, Viktor

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content