Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Shrinkage of hollow sphere

Posted Sep 13, 2013, 9:31 a.m. EDT Version 4.3a 1 Reply

George Xanthopoulos
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, I'm working on diffusion of a hollow sphere (axisymmetric 2D). I have set up the problem for constant external radius and I moved on to the ALE method of simulating the shrinkage of the external dimension (the inner radius is constant). I have a problem setting up the boundary conditions. I attached a pdf file where I explained what BC's I have chosen.

Domain - Free deformation zero initial displacements
Outer boundary - Prescribed mesh displacement (constant displacement in r & z directions)
Axis of symmetry - Prescribed mesh displacement (constant displacement in r & z directions)
Inner boundary - Prescribed mesh displacement (zero displacement in r & z directions)

Any suggestions?

Thanks

Attachments:

1 Reply Last Post Oct 9, 2014, 5:10 a.m. EDT
COMSOL Moderator

Hello George Xanthopoulos

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Kishore Gajula
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 9, 2014, 5:10 a.m. EDT
did you figure out the problem how to solve??
did you figure out the problem how to solve??

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content