Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
help needed for periodic condition
Posted Sep 28, 2013, 6:54 a.m. EDT Computational Fluid Dynamics (CFD), Chemical Reaction Engineering Version 4.3b 0 Replies
Please login with a confirmed email address before reporting spam
i am bit confused with the periodic condition in COMSOL. In the file attached (4.3b), i am trying to combine laminar flow and transport of diluted species. I wanna alternate the inflow and outflow boundary every 1000 s.
In the laminar flow part, it's relatively easy. I defined a waveform function to alternate the pressure difference. For the transport of diluted species, it's possible to alternate inflow and outflow on the left and right boundaries. However i can't find where i can define solutes concentration in the inflow. So the solute concentration in the liquid is always zero.
Can someone help to tell where to give solutes concentration in the inflow? Thanks!
Chunyan
Attachments:
Hello Chunyan Li
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.