Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Basic Question: How to add modules

Posted Oct 1, 2013, 7:38 a.m. EDT Installation & License Management, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 3.5a, Version 4.0, Version 4.0a, Version 4.1, Version 4.2, Version 4.2a, Version 4.3, Version 4.3a, Version 4.3b, Version 4.4, Version 5.0, Version 5.1, Version 5.2, Version 5.2a 4 Replies

Rollo Jarvis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I am following a number of tutorials as I need to learn COMSOL. I need to use the RF Module but it does not appear in the "add physics" window when I am creating a model. I have AC/DC, Acoustics etc. but my model concerns Electromagnetics so I need the RF Module.

Please advise me on how to add modules to COMSOL.

Many thanks
4 Replies Last Post Mar 27, 2017, 12:37 p.m. EDT
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 1, 2013, 7:44 a.m. EDT
Hello,
The COMSOL software is licensed in a modular fashion. It appears that the license you are using does not include the RF Module. Contact your local COMSOL office to discuss how to add that module to your license. You can find their contact information here:
www.comsol.com/contact/offices/
Best regards,
Jeff
Hello, The COMSOL software is licensed in a modular fashion. It appears that the license you are using does not include the RF Module. Contact your local COMSOL office to discuss how to add that module to your license. You can find their contact information here: http://www.comsol.com/contact/offices/ Best regards, Jeff
phy_311 lab
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago Aug 22, 2015, 8:12 a.m. EDT
Hello,
My COMSOL 5.1 Product doesn't include the Optics and Wave Module. How can I add "Ray Optics Module" to my COMSOL 5.1 Licence product?
Hello, My COMSOL 5.1 Product doesn't include the Optics and Wave Module. How can I add "Ray Optics Module" to my COMSOL 5.1 Licence product?

Attachments:

Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 years ago Aug 24, 2015, 11:25 a.m. EDT
The link in my posting above will allow you to contact your local COMSOL contact.
Best regards,
Jeff
The link in my posting above will allow you to contact your local COMSOL contact. Best regards, Jeff
Marko Zivanovic
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago Mar 27, 2017, 12:37 p.m. EDT
Hello Jeff,

I am new in COMSOL. I am working in microstrip antennas and I have to include the following effects in my simulation:
- temperature effect on EM characteristics of antenna
- temperature effect on antenna's geometry like strain, deformations due to different
thermal expansion coefficients of copper and layer/layers
- effect of mechanical deformations on EM characteristics of antenna caused by
temperature

I don't know what modules I need for that because I have to tell in department what licence and modules should be bought. Could you give me answer?

Best regards
Hello Jeff, I am new in COMSOL. I am working in microstrip antennas and I have to include the following effects in my simulation: - temperature effect on EM characteristics of antenna - temperature effect on antenna's geometry like strain, deformations due to different thermal expansion coefficients of copper and layer/layers - effect of mechanical deformations on EM characteristics of antenna caused by temperature I don't know what modules I need for that because I have to tell in department what licence and modules should be bought. Could you give me answer? Best regards

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content