Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Restricting solutions to not vary in one or more directions

Please login with a confirmed email address before reporting spam

I would like to perform a 1D eigenfrequency stress simulation of a horn using the Structural Mechanics module. In my Comsol package, there is no 1D Structural Mechanics module; there is only 2D and 3D. In 2D (or 3D), is there a way to perform a 1D simulation by restricting the displacement solution to be a function of only one direction, say the z-direction? I do not want the displacement solution to vary in x- and y-directions. This is different from prescribing the displacement in the x- and y-directions to be zero.

Any pointers as to how to start setting this up in either Comsol 3.5a or 4.2 (Windows platform) would be appreciated. Thanks.

1 Reply Last Post Oct 9, 2013, 8:49 a.m. EDT

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 9, 2013, 8:49 a.m. EDT
Hi,

Make sure you have "Advanced Physics Options" item selected (in Model Builder, the icon with the eye).

Then you can (on Solid Mechanics node, right click) add a "Pointwise Constraint" node (in first group, corresponding to domain equations, select "More").

Inside the "Pointwise Constraint" settings, write something like "d(u,X)" in the "Constraint expression" field. This one means that you want variable "u" (x-component of displacement field) be independent of X-coordinate.

Regards,
Jesus.
Hi, Make sure you have "Advanced Physics Options" item selected (in Model Builder, the icon with the eye). Then you can (on Solid Mechanics node, right click) add a "Pointwise Constraint" node (in first group, corresponding to domain equations, select "More"). Inside the "Pointwise Constraint" settings, write something like "d(u,X)" in the "Constraint expression" field. This one means that you want variable "u" (x-component of displacement field) be independent of X-coordinate. Regards, Jesus.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.