Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Element discretization order

Posted Oct 29, 2013, 4:16 p.m. EDT Mesh Version 4.3 1 Reply

Francisco Valentin
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

What is the default discretization order of the elements in COMSOL?
And is there an option to increase or decrease this?

Any comments on this are appreciated, I have tried reading through manuals but have not found anything regarding this issue.
1 Reply Last Post Oct 30, 2013, 2:03 a.m. EDT
Alex Podolski
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 30, 2013, 2:03 a.m. EDT
Hi, Francisco.

You can click the Show button and select Discretization to enable Discretization section on the physics interface settings window ( 2nd order is set by default). Also check out information in the Help about Discretization Node.
Hi, Francisco. You can click the Show button and select Discretization to enable Discretization section on the physics interface settings window ( 2nd order is set by default). Also check out information in the Help about Discretization Node.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content