Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Interjection Symbol for Heat Transfer in Phase I- Initialization Section

Posted Nov 8, 2013, 3:48 a.m. EST Fluid & Heat, Heat Transfer & Phase Change, Computational Fluid Dynamics (CFD), Chemical Reaction Engineering Version 4.3, Version 4.3a, Version 4.3b 1 Reply

Alican Ozkan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I'm using Heat Transfer Module together with Laminar-Two Phase Flow Level Set. Comsol solves everything related to fluid flow but it doesn't solve problem with Heat Transfer. And when I check "Step I phase initialization" under "Study" Section, it shows an interjection mark next to Heat Transfer Physics. Can anybody tell me what does that mean?

Thanks in advance,
1 Reply Last Post Oct 2, 2015, 2:26 p.m. EDT
COMSOL Moderator

Hello Alican Ozkan

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Akash Aggarwal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago Oct 2, 2015, 2:26 p.m. EDT
I am also facing the same problem.
Have you find the solution

Akash Aggarwal
I am also facing the same problem. Have you find the solution Akash Aggarwal

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content