Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Background magnetic field

Posted Nov 19, 2013, 7:55 p.m. EST Low-Frequency Electromagnetics, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.3 0 Replies

Adam West
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all

I am trying to model magnetic shielding against a background magnetic field. I have successfully managed this by inputting a magnetised object as my source of field. However, when I go to the 'background magnetic field' option and choose 'reduced field' along with a background field value, I don't actually see that background field in my plot, and thus the data is basically empty. Does anyone have any advice as to why this might happen? Am I missing a boundary condition?

My setup is simply a background field with a magnetic shielding boundary condition.

Thanks
0 Replies Last Post Nov 19, 2013, 7:55 p.m. EST
COMSOL Moderator

Hello Adam West

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content