Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Analyzing AC electric field for a cable
Posted Dec 6, 2013, 7:32 p.m. EST Low-Frequency Electromagnetics Version 4.2a 0 Replies
Please login with a confirmed email address before reporting spam
I wanted to analyze the electric field created by a 400kV AC cable to find the effect on dielectric. When I tried it using stationary solver for es field, I got the perfect answer. When I tried it in frequency domain, to simulate AC voltage, I am getting some license problem. I think as I am using 4.2a Classkit version, the frequency domain studies are not supported. Is there any other way to simulate AC voltage mainly using stationary solver or time dependent solver??
Thanks.
Hello Harshada Pendse
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.