Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

finding the magnetic field density in the center of a rectangular coil

Posted Dec 9, 2013, 8:19 p.m. EST Low-Frequency Electromagnetics Version 4.3b 0 Replies

Adam Recksiedler
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I have built a rectangular coil on solidworks which I imported to comsol to use as a magnetic field source, but cannot get it to work. I selected mef for my physics and placed a terminal at the top of the coil and ground at the bottom, but current does not seem to be flowing through the coil. Does anybody have any advice?
0 Replies Last Post Dec 9, 2013, 8:19 p.m. EST
COMSOL Moderator

Hello Adam Recksiedler

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content