Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Waveguide Modeling
Posted Dec 17, 2013, 10:20 a.m. EST RF & Microwave Engineering, Wave Optics Version 4.3b 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
I am trying to make a simple model where a light source is incident of an input port of a waveguide and then it passes through a different media. I need to see the output power (Intensity) at port 2. I looked at the examples in Comsol but not able to figure out how to implement this. I am giving a simple drawing of what I need to do.
Looking forward for your help.
Thanks in advance
--
Manoj
Attachments:
Hello Manoj
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
I am doing simulation for optical waveguide in which i used three ports , one as input and other two as outputs . In the port setting I choose 1[mW] as input power . Now I need to see how much output power I am getting at both output ports but couldn't be able to do so.
So is it possible to extract the received power at output ports.
Thanks in advance.