Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to find a face by its number?

Posted Apr 10, 2014, 2:11 p.m. EDT Geometry Version 4.4 2 Replies

Trent .
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

How do I locate a face in a geometry by its number? Let's say that the face 219 causes me meshing problem an I want to know where it is in my geometry.
2 Replies Last Post Apr 11, 2014, 5:32 p.m. EDT
Lasse Murtomäki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Apr 11, 2014, 4:08 a.m. EDT
In the Geometry window, Select boundaries, and then look at the Selection list which can be found under

Home --> More Windows
In the Geometry window, Select boundaries, and then look at the Selection list which can be found under Home --> More Windows
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Apr 11, 2014, 5:32 p.m. EDT
...or see www.comsol.com/community/forums/general/thread/43811/#p116941
...or see http://www.comsol.com/community/forums/general/thread/43811/#p116941

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content