Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Error: Meshes not compatible

Posted Apr 11, 2014, 9:38 a.m. EDT Geometry, Mesh, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.4 0 Replies

Jennifer Costelloe
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,

I'm running a mass transport simulation that involves first a laminar flow study, then using the results for a transport of diluted species study. I have had some issues with meshing my 3D STL geometries and so it was suggested that I import the mesh as a .dat file, which I have done. I wish to use a finer mesh for the second study, however when I import it, I get an error that reads "the meshes defined by the sequences "Mesh 1" and "Mesh 2" are not compatible - multiple specification of coordinate".

Can anyone advise what the issue might be here?

Kind Regards,

Jen
0 Replies Last Post Apr 11, 2014, 9:38 a.m. EDT
COMSOL Moderator

Hello Jennifer Costelloe

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content