Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Cyclic Voltammetry (CV)
Posted May 6, 2014, 2:26 p.m. EDT Battery Design, Chemical Reaction Engineering, Studies & Solvers 1 Reply
Please login with a confirmed email address before reporting spam
1) I am using the electroanalysis physics module with the built-in CV study only. How does one define the two electrodes which the CV is being applied, in the case of a two-electrode setup?
2) Is there a way to conduct the CV using a three electrode setup (2 electrodes + reference point)?
2) Is there a way to conduct the CV using a three electrode setup (2 electrodes + reference point)?
1 Reply Last Post May 7, 2014, 1:55 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
As far as I have understood it, the built-in CV node concerns only the working electrode and assumes that its potential is measured with reference to a fixed potential. But the Electroanalysis module has versatile possibilities to set-up a problem, you just need to set the boundary conditions in an appriopriate way. I guess it is possible to define a point/surface in the simulation domain with fixed potential to mimic a reference electrode.