Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Volume of fluid Method (VOF) for free surface simulation (fluid-fluid)

Posted May 14, 2014, 7:00 a.m. EDT Computational Fluid Dynamics (CFD), Microfluidics 1 Reply

FJNB
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am not sure whether COMSOL is able to simulate the flux of gas and liquid through a packed bed reactor (i.e. column filled with sphere particles).

There are some papers in the literature that simulate these problems by using VOF method (en.wikipedia.org/wiki/Volume_of_fluid_method).

Unfortunately, it seems that VOF method is not implemented in COMSOL. The main reason why I would like to the use of VOF inestead of an Euler-Euler approach is due to its preservation of a sharp boundary between immiscible fluids and computations of surface tension.

Any ideas?

Thanks
1 Reply Last Post Apr 2, 2015, 1:40 a.m. EDT
COMSOL Moderator

Hello FJNB

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Arjun Jayakumar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago Apr 2, 2015, 1:40 a.m. EDT
Hi,
Where you able to solve the problem
Hi, Where you able to solve the problem

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content