Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Piezoelectric Study of waveguide

Muhammad Shemyal Nisar

Please login with a confirmed email address before reporting spam

Hello.

I have made a model of lithium niobate waveguide cladded with silicon dioxide. As lithium niobate is a piezoelectric material I intend to check the inverse piezoeffect caused by my input signal in the waveguide.

To this end I added study of "Electromagnetic Wave, Frequency Domain" from RF module and "Acoustic-Piezoelectric Interaction" from Acoustics Module.

But unfortunately I am getting an error: "Segregated solver steps do not involve all components."
Can anyone help me with this? Secondly, is "Acoustic-Piezoelectric Interaction" from Acoustics Module good for this task or should I be using some other study from some other module? Say, "Piezoelectric Devices" from structural Mechanics module.

3 Replies Last Post Jun 12, 2014, 2:37 a.m. EDT

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 11, 2014, 10:10 a.m. EDT
You are not doing any acoustic things right? So I would say Piezoelectric Devices would suffice.
You are not doing any acoustic things right? So I would say Piezoelectric Devices would suffice.

Muhammad Shemyal Nisar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 11, 2014, 12:43 p.m. EDT
Thanks, but i get the same error with "Piezoelectric Devices" Study. (viz. Segregated solver steps do not involve all components.) Besides is it possible to achieve what I intend to achieve with my COMSOL design or am I being too ambitious?
Thanks, but i get the same error with "Piezoelectric Devices" Study. (viz. Segregated solver steps do not involve all components.) Besides is it possible to achieve what I intend to achieve with my COMSOL design or am I being too ambitious?

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 12, 2014, 2:37 a.m. EDT
I do not know about the error, you can also ask the COMSOL helpdesk if you get no answer here. I think it should be possible what you want in principle, but I do not know about computational limitations.
I do not know about the error, you can also ask the COMSOL helpdesk if you get no answer here. I think it should be possible what you want in principle, but I do not know about computational limitations.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.