Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
RF - harmonic propagation - electric polarization of subdomain
Posted Apr 8, 2010, 12:51 p.m. EDT 0 Replies
Please login with a confirmed email address before reporting spam
I am using Comsol 3.5a with the RF module to simulate the harmonic propagation of an EM wave and I would like be able to define the electric polarization of my subdomains. When using transient analysis I can go to subdomain settings, Electric parameters, Specify material properties in terms of eplison_r, mhu_r, and omega and then select the middle Constitutive relation to define the polarization. However, as far as I can see I can only use this under transient analysis, I can only define a lumped port but I would like to use an EM wave port such as with a microwave waveguide.
Is there another way?
Thank you,
Rob
Hello Rob McIntosh
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.