Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
waveguide to microstrip Measure s-parameter
Posted Jun 22, 2014, 12:59 a.m. EDT RF & Microwave Engineering, Geometry, Materials, Modeling Tools & Definitions, Parameters, Variables, & Functions, Results & Visualization, Studies & Solvers Version 4.2, Version 4.2a, Version 4.3, Version 4.3a, Version 4.3b, Version 4.4 0 Replies
Please login with a confirmed email address before reporting spam
I am designing simple rectangular waveguide of some 50x100. Then i try to catch microwave signal from waveguide to microstrip with 50 ohm strip line. I used FR-4 as material and copper , rectangular waveguide as alumnium.
I got error whenever i try to simulate. I want to know how i will see S-parameters.
Moreover, when i design rectangular waveguide structure you will see the part of microstrip inside rectangular waveguide divided into two part and i have to define two times wave port 32 & 36. this i feel is not correct.
i am new user can anyone explain or download my comsol file , make it correct and send me.
I will be thankfull to you
I have attached the comsol file and also one image file to show what i want to design.
best regards,
Mehdi Khan
Attachments:
Hello Prof. Dr. Mehdi Khan
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.