Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Electrolyte Solution

Posted Jul 2, 2014, 3:35 a.m. EDT Battery Design Version 4.4 1 Reply

Anup Kumar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Is there any option to use an electrolytic solution with specific electrolyte, concentration and/or pH value in COMSOL modelling, e.g. 0.1M NaCl solution with pH value of say 6. Please help me.
1 Reply Last Post Jul 2, 2014, 8:06 a.m. EDT
Lasse Murtomäki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jul 2, 2014, 8:06 a.m. EDT
You can define your own material with parameters you need. "New material" in the Materials section.
You can define your own material with parameters you need. "New material" in the Materials section.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content