Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
read temperature from a domain and use it in an equation
Posted Jul 6, 2014, 2:59 p.m. EDT Computational Fluid Dynamics (CFD) Version 4.3 1 Reply
Please login with a confirmed email address before reporting spam
Hi, I am new to COMSOL and I have a question to you guys. I am working on my masters degree project but currently I need some advice in order to be able to proceed.
I use the conjucated heat transfer module to simulate an overhead line conductor. The conductor domain is 1.
Is there a way to read the temperature of this conductor (domain1) and use it in an equation?
My equation is R = 2*T + 5 where T is the temperature of the conductor (domain1).
I tried using R = 2*mod1.dom1.T + 5 but this does not seem to work. Any suggestions?
Thanks!
I use the conjucated heat transfer module to simulate an overhead line conductor. The conductor domain is 1.
Is there a way to read the temperature of this conductor (domain1) and use it in an equation?
My equation is R = 2*T + 5 where T is the temperature of the conductor (domain1).
I tried using R = 2*mod1.dom1.T + 5 but this does not seem to work. Any suggestions?
Thanks!
1 Reply Last Post Jul 7, 2014, 4:40 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
I think T is dependent variable of heat transfer.
so, you can express R is just 2*T+5 in variables options.
so, you can express R is just 2*T+5 in variables options.