Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Coupling Magnetic and Solid Mechanics ( Attracting/ Repelling of two magnets)
Posted Jul 14, 2014, 12:19 p.m. EDT Low-Frequency Electromagnetics, Structural Mechanics Version 4.4 0 Replies
Please login with a confirmed email address before reporting spam
I have attached two models.
In the first one, I have defined magnets and fixed the end of the rods with Solid Mechanics.
And I want to see the two magnets attract or repel each other but it seems Comsol doesn't do the coupling automatically! coupling of Magetic and solid mechanics. Because the rods don't deform.
In the second one, I have put body forces to the magnets equal to the force that Comsol Estimates in Magnetic module. But I need Comsol to this not by me, because in that case the direction of forces is decided by me.
Is there any way that comsol will calculate the magnetic forces and put it in solid mechanics as BC?
So the rods will deform in the first model?
Thank you.
Attachments:
Hello Edvin Golestanyan
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.