Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Bioheat Transfer, Heat Flux
Posted Aug 2, 2014, 4:28 p.m. EDT Heat Transfer & Phase Change, Heat Transfer Version 4.3b 0 Replies
Please login with a confirmed email address before reporting spam
I need help with my model in Comsol 4.3b.
I created model from 3 domains (muscle, fat, skin) and I need to get heat flux on boundary.
This thermal stimulation last few seconds, and before and after I need to simulate thermal conduction from boundary (tissue 310K, adnviroment 293K).
So, I use heat flux with variable q_cooling
q_cooling = -80*(t<=1000[s])-1000*(t>1000[s] && t<=1100[s])-80*(t>1100[s]) [W/m^2]
I try different version of this equation and it doesnt work. There is only -80 W/m^2 thermal stimulation all the time. Comsol dont give me any errors.
Hello Tomas Juch
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.