Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Particle tracing module. Latent heat
Posted Aug 12, 2014, 8:18 a.m. EDT Fluid & Heat, Computational Fluid Dynamics (CFD) Version 4.3b, Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
I would like to simulate velocity, trajectory, temperature and melting small particle of silica (<500 um).I use particle tracing module and non-isothermal flow module. Particle temperature increase and particle melt. But melting include latent heat. In Particle tracing module this variable present. But if i choose equation view, variable Latent heat does not presented in variables list. How I can incorporate latent heat in particle melting equation?
Can someone help me?
Thanks everybody
Hello Олег Ruitkop
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
Currently i am working in the simulation of laser cladding. As a part of this multi physics simulation now am in the stage of modelling the CFD of the powder flow with the carrier gas and its interaction with the laser heat source. Fluid flow module and particle tracing in fluid flow module are currently used, but to bring the melting into the simulation and get it deposited which module should i use following the above two modules..??
Can you please share your model file for some clarity..?? if possible...!!
Thanks in advance.
-Barath