Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
3D simulation of waveguide with bragg grating
Posted Aug 22, 2014, 11:30 a.m. EDT Wave Optics Version 4.3b 0 Replies
Please login with a confirmed email address before reporting spam
I'm just starting with the 3D calculation. I'm interested in long-range plasmonic waveguide with bragg grating features.
I read some of tutorials about wave optics module and just follow them. And I have encounter with following problems.
1. I can simulate the propagation of light in plasmonic waveguide with the electromagnetic wave, beam envelop module, boundary mode analysis. But I cannot get same result with electromagnetic wave, frequency domain, boundary mode analysis.
2. When I put some grating feature with has different index or shape, then the Beam Envelop module dose not give some reliable result. The calculated field distribution is quite strange. Even I'm not sure that it could be calculated with the Beam Envelop module.
Could some one give me a advise with those problems? or recommend some materials about waveguide with grating?
Regards,
Choloong
Hello Choloong Hahn
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.