Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
heat transfer from LEDs to skin surface
Posted Sep 8, 2014, 7:52 a.m. EDT 1 Reply
Please login with a confirmed email address before reporting spam
i made a model in which i want to heat up skin surface from the IR radtions which are coming out from LEDs. in my model i have 6 LEDs. but i dont know how can i simulate these radiations, which are coming out from LEDs and penetarte into skin.
1 Reply Last Post Sep 16, 2014, 9:23 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi Asmat,
To do it correctly you would have to know more about how the light coming out of the LED's is distributed. But if the distance between the LED's and the skin is large compared to the LED's themselves you may approximate them as point sources.
To do it correctly you would have to know more about how the light coming out of the LED's is distributed. But if the distance between the LED's and the skin is large compared to the LED's themselves you may approximate them as point sources.