Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Vortex shedding (laminar model cylinder_flow)
Posted Sep 16, 2014, 5:58 a.m. EDT Studies & Solvers Version 4.3b 0 Replies
Please login with a confirmed email address before reporting spam
I have been trying to get the vortex shedding frequency and the St number from the standard COMSOL model of flow past cylinder. The model already plots the lift and drag coefficients, I just changed the x-axis of the 1D plot group to frequency spectrum to get the FFT. I am getting the St number at peak as 0.28 which differs from the standard values of St number found in literature which is 0.168 for Reynolds Number 100. I have not made any other change to the model.
Any help will be appreciated.
Thanks!
-Aaditya
Hello Aaditya Anand
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.