Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

resistance measurement

Posted Sep 25, 2014, 12:18 a.m. EDT MEMS & Nanotechnology, Heat Transfer & Phase Change, MEMS & Piezoelectric Devices, Geometry, Mesh, Results & Visualization, Studies & Solvers Version 4.2a, Version 4.3, Version 4.3a 0 Replies

Mayank Dhull
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,
I am working on joule heating and thermal expansion module.
I want to measure resistance between two terminals. No voltage is applied to the terminals, no current flow initially. Later through induction or channel formation current will flow and it will change the resistance.
How do i measure the resistance initially and after current flows.
Thanks
0 Replies Last Post Sep 25, 2014, 12:18 a.m. EDT
COMSOL Moderator

Hello Mayank Dhull

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content