Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to save current step solved results to be used in the next step?
Posted Sep 27, 2014, 11:13 p.m. EDT Heat Transfer & Phase Change, Materials Version 3.5a 0 Replies
Please login with a confirmed email address before reporting spam
I'm greenmen in comsol, recently, I have developed a one-demensional comsol model for simulating PAS process for hydrogen purification. A complete PSA involves several steps and each step's BC and IC are different. I want to ask you how save last step solved results for use to solve next step how to define BC and IC of each step. I hope you could give me some valuable and useful advices or suggests. Very much looking forward to your reply! Thanks.
Hello Yuzhi Peng
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.